|
Klüber ISOFLEX NCA 15：
收藏
Klüber ISOFLEX NCA 15德国原装进口 Spindle bearing grease Benefits for your application – Longer rolling bearing life due to good wear protection, water resistance and pressure absorption capacity – Tried and tested over many years especially in high-speed and low-temperature applications – Low heating-up of bearings due to low lubricant friction leading to longer service life – Low running torque enables energy savings, particularly at low temperatures, hence costs savings possible Description ISOFLEX NCA 15 is a dynamically light grease with good pressure absorption properties for plain and spindle bearings. It consists of ester oil, synthetic hydrocarbon oil, mineral oil and special calcium soap. The product is resistant to water and protects reliably against wear. Application ISOFLEX NCA 15 is particularly suitable for the lubrication of spindle and tapered roller bearings, threaded spindles, ball screws subject to high loads, and for all high-speed bearings, e.g. bearings in OE-spinning turbines used in the textile industry. Application notes The lubricant is applied by brush, spatula, grease gun or grease cartridge. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application. Pack sizes ISOFLEX NCA 15 Tube 50 g Cartridge 400 g Can 1 kg Bucket 25 kg Product data ISOFLEX NCA 15 Article number 004180 Chemical composition, type of oil mineral oil Chemical composition, type of oil ester oil Chemical composition, thickener special calcium soap Texture short-fibred Texture homogeneous Lower service temperature -50 °C / -58 °F Upper service temperature 120 °C / 248 °F Colour space beige Density at 20 °C approx. 0.94 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Product data ISOFLEX NCA 15 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 21 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 4.5 mm²/s Speed factor (n x dm) approx. 1 300 000 mm/min Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 8 000 mPas Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 3 500 mPas Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Low-temperature torque, IP 186, -50 °C, start <= 1 000 mNm Low-temperature torque, IP 186, -50 °C, running <= 120 mNm Drop point, DIN ISO 2176, IP 396 >= 180 °C Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 24小时服务热线:
|
